Metal Frame Embroidered Bag Pattern – Mixing Machine & Hand Embroidery

A few weeks ago I shared an article on what simple embroidery stitches you can find on your sewing machine.  

In my case, I have a total of 85 stitches. I am trying to make a new project for each stitch, and for this one, my metal frame embroidered bag, I used my stitch numbered 77 and some hand embroidering.

This is a project for exploration not so much about the bag but more about the possibilities of mixing two media to change the texture of the plain fabric.

I hope you enjoy it and learn as much as I did with the project.

Materials

Tools

Fabric Recommendations from Fabric.com

I am using heavy intreated canvas. Here are some recommendations of similar materials you can source from Fabric.com.

Sewing Level: Advanced Beginner

How To Print And Download The Metal Frame Embroidered Bag Pattern

Please use Adobe Reader, print in Landscape Mode and do not scale.

Pattern Download

Like most of our patterns, this pattern is free. But now you have the option of making a small contribution if you like our work! We'd really appreciate it and it will help us keep going with new and fun designs like this. Even a dollar or two really goes a long way.

Thanks so much in advance for helping us out.  You can use any credit card and you don't need a Paypal account, although you can use one if you have one.

Pattern Layout

Sewing Instructions

The seam allowance of 3/8″ is already included in the pattern.

This is a very easy bag to put together, the key is to find a metal frame that is 20cm long and curved. But if you can not find the size for the pattern, please take a look at this article where I teach you how to make your own pattern.

Cut all the pieces on the outside fabric, the lining, and the Pellon layer.

Mark the notches of the pattern onto the fabric using an erasable pen.

Zigzag the edges of the outside fabric to prevent it from fraying.

Metal Frame Embroidered Bag

I used stitch number 77 on my Bernina 350 Patchwork Edition to sew a honeycomb pattern. This took me around two hours. Then I added Gutternman beads and sewed them on all the corners.

Metal Frame Embroidered Bag

Next, I embroidered detached chain stitch around each bead.

Metal Frame Embroidered Bag

The following steps are the same for the outer fabric, the Pellon layer, and the lining.

Metal Frame Embroidered Bag

Pin the centre of the gusset to the bottom of the centre front.

Pin from the bottom to the top. I find with experience this is better than pinning around. In case you cut the fabric wrong this will help you distribute the gusset evenly.

Metal Frame Embroidered Bag

If you have never sewn curves before the best tip I can offer you is to change the normal foot to a zipper foot and sew as wide as the foot, then sew again at 3/8″ as the pattern calls for. You can trim the seam allowance by half.

Metal Frame Embroidered Bag

Metal Frame Embroidered Bag

NOTE: When sewing the lining leave a space between the notches marked in our pattern so the bag can be turned right side out.

Metal Frame Embroidered Bag

Assembling Your Metal Frame Embroidered Purse

Place the outer layer of the purse right side out.

Metal Frame Embroidered Bag

Insert the Pellon layer inside the outer layer.

Take this two layers and insert it inside the lining. The lining should have the seams outside.

Metal Frame Embroidered Bag

Metal Frame Embroidered Bag

Note: Turn the seam allowance to the gusset.

Metal Frame Embroidered Bag

Zigzag the three layers together then sew at 1/4″. Notice below the seam allowance is turned to the gusset.

Metal Frame Embroidered Bag

Turn the bag through the opening of the lining.

Metal Frame Embroidered Bag

Metal Frame Embroidered Bag

Sew the lining using a running stitch.

Metal Frame Embroidered Bag

Sew the frame to the the purse using the running stitch.

I liked how this metal frame embroidered purse turned out. All in all, it was easy and fun to make and I hope it will serve you well as a good-looking introduction to bag making.

Adding your own texture to a plain fabric makes your work so much more appealing and sets it apart from the rest, especially if you are selling your purses at a market. Go ahead and try, please do let me know how it turns out for you.

Does the pattern of this metal frame embroidered bag not work for the frame you already have at home? Try making your own pattern with this step-by-step tutorial.

Until Next Time, Happy Sewing!


If You'd Like To Support Our Site

If you want to help us continue to bring you a wide selection of free sewing patterns and projects, please consider buying us a coffee.  We'd really, really appreciate it.

Bookmark the permalink.
0 0 votes
Article Rating
Subscribe
Notify of
guest

10 Comments
Inline Feedbacks
View all comments
Maryś
Maryś

Super torebka i oryginalna 🙂

Brandy
Brandy

Beautiful!
Why did you miss a bead near the bottom left?

Jennifer
Jennifer

This is absolutely beautiful.

Anne Evans
Anne Evans

A lot of work but a fabulous result! 🙂

Mea Cadwell
Mea Cadwell

You did a beautiful job on this bag! Thank you for sharing it.

I get a thin gauge treated canvas painter’s dropcloth and us it for making bags. It’s inexpensive and water resistant.

For purses there’s less chance of anything inside getting wet if the bag gets placed on a damp surface.

In the case of grocery totes, if anything leaks, there’s less chance it will get all over outside surfaces.