Reversible Fabric Vinyl Tote Bag – New Free Pattern

Reversible Fabric Vinyl Tote BagThis week we are going to make a reversible fabric vinyl tote bag from a new free pattern.  I had planned to make a new skirt pattern but I just didn't have the right fabric.  After our recent house move, this is the state of my sewing/art room at the moment…

Reversible Fabric Vinyl Tote BagHowever, I was able to find some vinyl and a nice print fabric from the part of my stash I can locate.  I will have to go with what I have on hand and force myself to stay put and not run to the fabric store, much, I'm sure, to the satisfaction of my husband.

So here we go.  This project is for the temperamental person like me who gets bored with the same bag but is running out space in the closet so should not make another one.

Reversible Fabric Vinyl Tote Bag

Ideally, this project is for the confident beginner who has made other simple bags and it is looking to expand her technique.  The ability to sew a straight stitch and cut fabric in a straight line is imperative since all the seams need to match.

Reversible Fabric Vinyl Tote Bag

Tote bags are super functional and there are a plethora of fashionable styles.  I prefer the kind I can change according to my mood and outfit.

A reversible fabric vinyl tote bag is my way to go.  The vinyl side for a more upscale look and the fabric side for a more relaxed outfit.  On either side, there is a bag you can use with confidence and style.

Reversible Fabric Vinyl Tote BagReversible Fabric Vinyl Tote Bag

Materials

Fabric Recommendations from Fabric.com

Pattern Download

Opt In Image
Download the Free Pattern

You can download the pattern for this Reversible Fabric Vinyl Tote Bag Pattern from our account at Payhip.

For help downloading and printing PDF patterns, please CLICK HERE.

Pattern LayoutReversible Fabric Vinyl Tote BagSewing Your Reversible Fabric Vinyl Tote Bag

THIS IS THE FIRST PART OF THIS BAG there are another two tutorials coming soon.  

We are going to start this fabric/vinyl tote bag by making the handles.  See my self-critique on the handles at the end of this tutorial before you start.  We will sew the bag in stages, first the fabric and interfacing, then the vinyl.  Lastly, we will put it all together.

Sewing The Handles

Cut two strips of fabric that are 44″ (112cm) by 1 1/2″ (4cm) wide.

Make three lines 3/8″ apart, use the first and third ones as fold lines.  Bring the edges of the handle to meet at the center by applying glue.


Reversible Fabric Vinyl Tote Bag

Put the handles aside. I have left them overnight to dry.

Attaching The Handles To The Vinyl

Mark the stitching/glue lines of the handles using your pattern.  I have used an erasable pen.  Reversible Fabric Vinyl Tote Bag

Sewing The Strap

Apply glue to the wrong side of the vinyl along the area that is shown as a stitching line on your pattern.  Leave the glue dry for about 5 minutes.

Attach the strap to the glued area. Reversible Fabric Vinyl Tote Bag

Sewing The Fabric

Mark the middle of the front and back of the bag as shown in the picture below marked by the blue arrow.

Place the right sides together and sew the sides at 3/8″ (1cm). Leaving a gap of 6″ (15cm) to be able to turn the fabric print side out.Reversible Fabric Vinyl Tote Bag

Attaching The Snaps

Glue the round vinyl pieces to the lining.

Reversible Fabric Vinyl Tote BagOpen a hole in the middle and attach the snap using a kam tool.

If you do not know how to do it, follow this tutorial on how to apply snap fasteners:

A Quick Guide To Snap Fasteners For Clothing Or Bags

If you don't have a traditional snap fastener, you can also use a magnetic snap.  Here's a tutorial for placing this type of closure:

How to Install a Magnetic Snap

Reversible Fabric Vinyl Tote Bag

If you are using a magnetic snap, wait until the lining and the interfacing is sewn together to apply it.

Sewing The Vinyl And Stabilizer

Mark the middle of the front and back piece as it was done in the lining. Shown below in the picture below with the blue arrow.

Reversible Fabric Vinyl Tote Bag

Sew the sides at 3/8″ (1cm).Reversible Fabric Vinyl Tote Bag

Sew the bottom at 3/8″ (1cm).  This part is tricky for the beginner so I suggest you read through the tips I have given you on this post to successfully sew a curved piece.Reversible Fabric Vinyl Tote Bag

Cut another bottom piece but take away the seam allowance and glue it to the wrong side of the bottom of the vinyl part.Reversible Fabric Vinyl Tote Bag This step is so that the bag can stand on its own.  It's optional but it will improve the look of your bag.

Repeat with the stabilizer. We will have three layers of material that we will put together in the next step in a slightly different way.

Assembling The Reversible Fabric Vinyl Tote Bag

Turn and glue the edge of the bag 3/8″ (1cm).

Reversible Fabric Vinyl Tote Bag Reversible Fabric Vinyl Tote BagFinger press the edge to make sure the glue has taken both sides.  Leave to dry for a few hours.

In the meantime, we can sew the interfacing and the fabric together.

Mark the placement of the magnetic snap over the small vinyl circle you have glued previously.

Place the right side of both fabric and interfacing together.

Reversible Fabric Vinyl Tote Bag

Sew the top edge will be sewn at 3/8″(1cm) making sure you will maintain strict seam allowance or the bag will not fit together.  Reduce the seam allowance and turn the lining right side out through the gap you left on one of the sides.

Iron the fabric and interfacing together making sure you leave a crisp top edge.

Reversible Fabric Vinyl Tote Bag

Insert the fabric and interfacing inside the vinyl part.  Use quilting, wired or easel clips to hold the layers together.

Apply glue to the vinyl layer limiting the amount to 3/8″ (1cm) then press the fabric/interfacing on top.  This part will go slowly but it will join both sides together.

Let the reversible fabric/vinyl tote bag dry for at least an hour before topstitching.

Reversible Fabric Vinyl Tote Bag

Finally, close the gap in the fabric by using a running stitch with a  needle and thread.

Reversible Fabric Vinyl Tote BagReversible Fabric Vinyl Tote BagSelf Critique

There are three things I would change to make the bag more interesting and better looking.  Admittedly the weak spot in this bag are the handles.  I would make the handles 3/8″ (1cm) wider and sew and glue a strip of the fabric on the side where the sides meet.

I would also like to explore the use of patchwork on the vinyl side to make it more attractive and tie in the lining with the vinyl.  So I am giving myself a B- but since this is my sample I will go back to the working table and improve on my observations.

Do you agree with this critique?

Join me next week when I will be showing you.

  1. How to turn any bag into a crossbody bag.
  2. How to make an adjustable strap for any bag.
  3. How to make a reversible clutch.
  4. And I will be sharing my favorite blouse in the world (in the last decade)

I have to admit I am looking forward to your reversible fabric vinyl tote bag pictures on Instagram.  I hope you take on the challenge and share your pictures with me using #soseweasyoffical, #soseweasypatterns #soseweasy.  I'm very curious to see what interesting combinations everyone will come up with.

What other bag and combinations would you like to see?  What would you add to the bag?  Do let me know in the comments below.  Happy Sewing!

Reversible Fabric Vinyl Tote

Bookmark the permalink.
0 0 votes
Article Rating
Subscribe
Notify of
guest

70 Comments
Inline Feedbacks
View all comments
Teresa Reichenbach
Teresa Reichenbach

I love this tote and I would like to make it. Reading through the construction I do have a few questions.
There is a pattern piece labeled “Zippered Pouch/Clutch” but there is nothing in the instructions about this. Where does it go, what is if for?
Right below the layout diagram it says “THIS IS THE FIRST PART OF THIS BAG there are another two tutorials coming soon.” I am unable the find the other two tutorials. Did they happen?
Thank you for all your wonderful patterns and instuctions!
Teresa

Susan Ellis
Susan Ellis

I love your Sunday emails. I look forward to them every week. I have learned so much from you over the years, and I am so grateful that you are willing to share your talent, knowledge and experiences. I tried sewing with vinyl once and it was a nightmare, so all my my bags are fabric. Do u have a post to direct us to with starter suggestions and guidance?

Terry
Terry

Definitely want to try this. I’m not sure what you mean about glue and sew strip on sides. I too just move and I’m suffering from box mislabeling by hubby and friends. Gotta take the good with the bad when someone helps you move…lol

Cathy
Cathy

Thank you for your tutorials and patterns. I really don’t have any intention of making this tote, but this weekend, I was making a bag to hold a baby play mat gift I just finished. I had decided that since the quilt was scrap denim, I would use one of the jean “tops” to make the bag. The right size jeans were not long enough (I’d already chopped the legs off), so I used your bag bottom to make a bottom for my bag. Since your bag was 4″ narrower than my jeans and I wanted my bottom a bit deeper, I cut up your bottom piece adding 3″ in length and 1/2″ in width. I didn’t do all your careful measuring before sewing, I just pinned it closely; the denim was more forgiving (stretchy) than your vinyl. It worked perfectly!!! Seeing your pattern Sunday morning gave me the vision I needed to get my gift finished. Thanks again.

Cathy
Cathy
Reply to  Mayra Cecilia

I added tags to my Instagram post. #canadiancathy

Emma
Emma

I agree.

Marcia Gold
Marcia Gold

Great tote Idea, I will be using the pattern when things settle down here.
I commiserate about the move!!
Impossible to find squat in one’s sewing room after a move…

I had the same experience not that many days ago.
Still have somewhere between 4 and 12 boxes to unpack and investigate!!
Don’t know about you, but when we moved, my sewing room shrank at least 2-3 feet in both width and length.

My old sewing room had one wall that was nothing but UV glass windows!!
The new sewing new room has horrible lighting…
I hate “daylight” lighting fixtures. It changes the color of everything, blacks look blue, reds look scarlet, white looks beige…
My new sewing room has a skylight, but I can’t use it as the glass in the skylight is NOT UV FILTERED.
Even my husband realizes that opening the skylight would damage somewhere around $5,000++ worth of fabric.
Much of which is re-replaceable.

I am currently sitting in my living room which has 4 clear sliding glass doors and looking at the “can lights” in the ceiling. NO WAY Is daylight lighting the same as real daylight!!

Unfortunately, my “new” sewing room has only “daylight” lighting, i.e. yellow, yellow, yellow…

My husband has promised to install bright white (but non-UV) lights to replace the “daylight” ones, but (of course) that was about 2 weeks ago…

Now I take my fabrics into the living room, the bathroom, or outside on the deck to actually see if the colors of these fabrics co-ordinate or clash!!
(The bathroom usually as it is closer to my sewing room and has a skylight!)

Much sympathy and wishes for good luck in the re-establishment of your new sewing room!!
And thanks for letting me rant about my similar situation!!!
All the best,
Marcia

lorrdonn

Thank you – brilliant idea

Cheryl W
Cheryl W

Just a few questions on the PDF pattern page:

1. It calls for these items, but their use isn’t mentioned in the instructions.
 Two 1″ D rings
 Two 1″ lobsters claws
 One 1″ buckle

2. There are 2 Tab pieces spelled out, but also not mentioned in the instructions.

3. What are we to do with these items?

4. Lastly, in the pictures it looks like there’s a pocket on the lining piece. Does it have a pattern piece as well, or perhaps it’s an illusion with the patchwork lining fabric?

Many Thanks,
Cheryl W

Diane Dunn
Diane Dunn

What glue do you recommend?

Lacona

As you said, the handles are the weakest part. What if you had handles that went under the bag as well? If you wanted to you could make the handles of material that matches the cloth side.

Tracey W MacDonald
Tracey W MacDonald
Reply to  Lacona

Yes! Or possibly navy nylon webbing.

Peg Sullivan
Peg Sullivan

Enjoy your weekly e-mails. Just like letters from a friend. I want you to know that I have made several tees from your free pattern. The fit is perfect, even better that designs from the big 4! You are so generous with all the freebies and I do appreciate (Limited budget) but I am pleased that we can now slip you a $ or more for a pattern. Good luck and thanks.
PS the shorts from a couple weeks ago should come with a warning, make for girly figures-not womanly figures. Way to skinny in the fit. Okay though since I make a sample first so not a loss. will donate to clothe drive where they will be much loved.

Alison Alison
Alison Alison

I agree. I love your site, your emails and appreciate your generosity. I get your emails Sunday mornings and it’s such a nice way to start Sundays, which are busy for us.

Chris
Chris

Thank you for taking the time to share your talents. I sent an email asking a question about the free cowl neck top several weeks ago. When I didn’t receive an answer, I also asked the same question on that specific pattern page. I still have not received an answer. Is there another way I can receive an answer to my questions about a pattern?

Debbi Gerard
Debbi Gerard

I like the simplicity of this tote! I haven’t tried vinyl yet so this may be my first. Thank you for sharing your talent and time to put these things together for others.

Laura Dallas
Laura Dallas

I love this reversible tote. I think you are correct in your self-assessment of the strap width: a little wider would be better. Perhaps a strip of another fabric covering the side where both edges meet would enhance the look. A strip of grosgrain ribbon or a fancy ribbon would add a secret “wow” factor. I wonder if iron-on vinyl would work for one side? Also, do you think that a foam-type stabilizer would add anything to the structure? Thank you for all the creative ideas you give us!

Judi Boniface
Judi Boniface

I’ve made several of your patterns and they always come out great! However, I’ve never sewn vinyl, do you use a particular kind of needle and thread? What about stitch length? I imagine if the stitch length was too small it would tend to cut the vinyl as it ages.
Thank you for sharing the pattern, you are very talented!
Judi

Xitlaly Martinez
Xitlaly Martinez

I’m so happy I came across your page, you’re super talented . And the fact that you take the time to upload so many beautiful designs and basically give them away is just heart warming in a way. Not a lot of companies do this.

I also read some comments on here and I don’t think they understand they can take away from your designs whatever they want. They critique your work like they were forced to make their work by your design and your design only. It’s comical to me and I hope you don’t take the comments as harshly as they came across to me, but hey i’m also just new here.

Anyways, when I finally gather the material and time to learn how to sew I will DEFINITLEY be visiting your page.

Best,
Xitlaly Martinez

Sabrina Watson Smith
Sabrina Watson Smith

????(thumbs up)

Wendy
Wendy

Trying to find the next part of this tutorial and have had no luck! Is there a link please?

Laurence
Laurence

hello, can you tell me what is the room 1 (tab) and the square below drawn on the pattern. Is the interface composed of a simple cotton voile?. Thank you in advance for your response and thank you for sharing your sewing patterns.

Kate
Kate

Can’t work out what parts 4 and 7 are there for. I love the look of this bag, but wish your instructions were clearer. I’ve been sewing for years, but can’t make head nor tail of them

Cindy
Cindy

I made this bag, not reversible could be if i wanted it too, but used thick vinyl for the outside, nice bag and just made slightly smaller. The base dimensions still worked which was good. It’s a lovely bag made my straps wider, and inserted a pocket. I like zippers also, and have many bags with zips. I find the bag is quite deep and the magnetic strap works fine. Thanks and am now considering making it in all fabric.
Would probably be less structured, but fine with me and use a zipper closure. Sometimes when you use vinyl which i did and made the straps wider you do find the straps can be too heavy for the bag. With fabric if they are wider you don’t have that problem.

kristin
kristin

do you cut out the part on the template where the straps are supposed to go to mark the fabric?

Jane D'Alfonso
Jane D'Alfonso

Thank you so much for the detailed, well written tute! I read it forward and back 3 times and feel confident enough now to construct a bag like yours. Successfully. Pix may follow.
I learn so much from you folks! Thanks for the excellent blog.

Jean Tanner
Jean Tanner

Thank you love your patterns. This looks great.

Sharon
Sharon

Love this reversable tote and the colours! blue & white is so clasic. Love the top shape of your bag, looks so professional. Only problem for someone like me those a lots of pockets person, didn’t notice you had any,. I suppose a bag organizer could be used here.
I made a reversable bag as a gift in a hurry the other day. Have two long panels on both sides of fabric side of bag for lots of pockets , and it’s not too noticeable because it’s of the same fabric. ( On fabric side)
This is one I made that’s reversable.

Sharon
Sharon

Love this reversable tote and colours, blue & white is so clasic. Love the top shape of your bag, looks so professional. Only problem for someone like me those a lots of pockets person, didn’t notice you had any,. I suppose a bag organizer could be used here
I made a reversable bag as a gift in a hurry the other day. Have two long panels on both sides of fabric side of bag for lots of pockets , and it’s not too noticeable because it’s of the same fabric.
This is one I made that’s reversable.

Karen
Karen

I think I will try the bag with some leather I have in place of the vinyl. Thanks for the pattern.

Leigh
Leigh

This is an attractive bag. I like the shape of it and I agree the handles could be a bit wider. I haven’t yet made anything with vinyl but would give this a go.
My favorite bag from your site is the Cross Body Bag, I love it! I’ve made it twice and plan to make another soon. I’ve also made the Lucy Tote. I purchased the Carry-All pattern but haven’t made it as yet. Great patterns from a great site. Having the videos to follow are an added bonus and are VERY helpful for when you need a good visual!

Nancy
Nancy

This bag is adorable. What is the finished size?

Terra
Terra

I think I would have also used an “Invisible” magnetic snap – the kind with the square of plastic around it, that are sewn inside the lining, so they can’t be seen, which should also make them so they’d work on both sides. It’s a great bag, though! (Would the D rings and lobster claws have been for a removable shoulder strap?)

Dawn Liscom
Dawn Liscom

I have not sewn vinyl before. Is there a particular sewing machine needle you recommend? Any change to thread type or stitch length, or other tips?

Debra
Debra

I’m not fond of the snap pieces showing on the fabric side. Is there some way to cover them? Would rather not have a reversible than to have a bag that looks like I turned it inside out.

But I do like the pattern and shape of the bag.

Janet
Janet

Very nice! I agree with LadyD about a zipper closure. I would love to see a beach tote using mesh pet screen and fabric. I see lots on line but no how to’s and I need the how to!
Love you stuff !

Akane Scott
Akane Scott

I just love your bag as is! The thin straps remind me of all the Luis Vuitton bags I see people with, which all have skinny straps. I think yours is perfect, from the elegant white alligator look on the one side and the tasteful patchwork fabric on the other. If I were to make it I would recreate yours because I don’t think it could be s improved ?. What is the adorable white fabric with yellow rings that you photographed the bag on & where did you buy it?

Nadine
Nadine

A very pretty bag & I like the versatility of it being reversible. I agree the straps should be wider and there should be fabric sewn to their unfinished sides. I would also want a zippered pocket added to the fabric side.

K. Jones
K. Jones

I love this bag!

The link to the lobster claws actually goes to d-rings.

Karen Badger
Karen Badger

In reading through the materials list and then looking through the instructions. I’m confused as to why lobster claws, a buckle, and two d rings are on the list?

Shanna?
Shanna?
Reply to  Karen Badger

My thoughts as well!

Carol Weber
Carol Weber
Reply to  Karen Badger

I wondered the same thing. A goof, I’m assuming?

Barbara Funk
Barbara Funk
Reply to  Karen Badger

I wondered the same and kept looking at the pics before deciding it was just an oops to include them

Harriet Cook
Harriet Cook
Reply to  Karen Badger

That’s my question, too.

LadyD
LadyD

I agree, the handles should be wider. And, I would add an additional snap closure to the top. One snap is too insecure. I actually prefer a zip closure over snaps for security reasons.

Jane
Jane

This bag is adorable! For those not confident in matching seams it could be made without being reversible. The only thing I would change is the width of the handles. I give you an A.